Analysis of the problem of saw blade cutting

　　Cutting the workpiece in the phenomenon of burr is a lot of customers the most headache problem, today small make up to sum up the cause of the phenomenon of burr and solution:
The main factors that cause the cutting burr of the saw blade are: the material of the processed part, the pitch of the pitch too large, the speed of the sawing, the saw blade has been worn, the precision of the saw blade, and the adjustment of the machine's precision.
According to above problems, sharp positive solutions: according to the processed material selection appropriate blade (high-speed hacksaw blade milling cutter, tungsten steel milling cutter blade, inlaid tungsten hacksaw blade cutter); choose appropriate saw tooth and angle; adjusting cutting speed; check the saw blade has broken the sharpness of the teeth and tooth; accuracy of measurement of the saw blade; adjust clamping saw blade precision.
There is no burr on the other side of the workpiece saw the other side of the burr is normal phenomenon, cut the entrance of this plane without burr, cut out the surface will have a burr phenomenon.