Advantage of the thread milling cutter

The cost is lower, while the single thread cutter too expensive silk attack, but the cost is much lower than the single thread tap.
The higher precision, to achieve precision thread milling cutter compensation, can choose the accuracy level of customer needs.
- finish, thread milling the teeth finish better than tap.
The thread cutter is more than and 10 times longer than that of tap or even dozens of times, reduce the time wasted in atc.
Not afraid - broken, broken wire may attack the risks caused by the workpiece scrapped, even artificially broken thread milling cutters are easy to be taken.
The processing efficiency is much higher than that of screw thread cutter;
The blind can not get to the bottom wire tapping, thread cutter can.
- in addition to M and UN, a thread cutter can be internal and external threads to processing different spin silk attack, No.
The same pitch different thread hole size, screw tap need to replace a few, thread cutter can be used.
The first thread gauge aperture is not outdated, complemented by modified thread milling cutter, wire tapping is not good, only the workpiece scrapped.
In the fabrication of large threaded hole screw thread cutter can not match, can achieve instantaneous.
The thread milling cutting into powder short crumbs, no wound knife; cutting helical screw iron, easy winding knife.
Non - contact tooth cutting thread milling machine, load and cutting force of small bills.
The clamping screw is simple, flexible to handle tapping; thread milling cutters available ER HSK hydraulic heat up and handle.
- a house type thread milling cutter rod can be replaced at the same time. Us. Metric and inch and the other blade, the economy is good.