How to improve the turnover speed of the saw blade milling cutter?

　　The hard alloy blades of normal use for a period of time, the blade will be blunted, become less sharp. Under normal circumstances, we have recommended that the user to grind the saw blade milling cutter to continue to use. The so-called saw blade milling cutter grinding, is to return to Zhangjiagang saw blade milling cutter manufacturers, the wear of the blade with diamond wheel grinding, knife grinding out, can continue to use. Practice has proved that if the grinding is good, after the grinding of the blade with the new knife as easy to use.
Saw blade milling cutter grinding can use unit greatly reduce costs, this need not elaborate on this, so the use of units also attaches great importance to. Normally, the use of the unit will be ready for three sets of blades, a set of is in use, a set of spare in the warehouse, there is a way to repair the grinding. If the saw blade milling cutter grinding speed, and can only need to prepare two sets, a set of being used, a set of grinding on the way, but this requires the grinding delivery time. As a result, customers will often urge to repair the blade quickly to the situation of delivery.
Is here to remind customers, the following factors influence the saw blade milling cutter repair grinding speed: the angle of grinding wheel tooth, tooth groove on the bottom of the arc size, due to the different milling cutter blade factory production process of different, resulting in different brands of saw blade milling cutter on the grinding wheel tooth different angles, the is 45 degrees, some 55 degrees, if just repair grinding plant no common grinding wheel angle with the original blade is not the same, it will bring a lot of unnecessary trouble, such as special dressing a same angle of grinding wheel, this will require a longer time, you may need to wait until 2 days.
Maybe you might say, you're just going to have to do a few more grinding wheels. Above I just give a small example. And saw blade milling cutter tooth ditch bottom round degree, the tooth depth, the width of the tooth back, both to the assurance dimension, but also ensure the use of effects and the superposition of many factors, many processes, each process to spend half a day time, then a few days past.
Therefore, we suggest that the blade can not be sent to the manufacturers to repair the grinding, the next batch of the same batch of blades sent to another manufacturer of grinding. Grinding milling cutter blade manufacturers to be fixed, so, which not only saves the saw blade milling cutter grinding manufacturers of the time, saving your time, is the most important, can also increase the saw blade milling cutter grinding times, reduce the cost of the blade.