What are the reasons for the burst of the saw blade?

Caused by the first saw burst reason has the following several points: 1. The saw blade cutting speed is too high; 2. The feed speed is too high; 3. The use of saw feed speed instability; 4. Feed and cutting speed is not properly; 5. The saw blade in use no clamping; 6. Is a material processing not clamped on the use of; 7. Tooth saw blade pitch is too big or too small; 8. Lubricant or coolant not in use or use; 9. Pipe weld reasons such as uneven.
Face of solutions to the above problems: 1. Adjust the blade cutting speed; 2. Adjusting the feeding speed; 3. Adjust the blade of feed speed; 4. Adjust the cutting speed than; 5. Check the flange; 6. Check is material processing clamp is clamped; 7. Adjust the blade pitch from the big small; 8. Check the mechanical lubricant or coolant if used properly. Replacement tubing.